Water Management For Nursery
Leave a message
The most important job in the seedling production process is water management. But in the actual work process, it is often done by people with little experience. Watering at inappropriate time or in the wrong way will seriously affect the production of plug seedlings.
Never allow plug seedlings to dry completely; on the contrary, too saturated water in the substrate will not work, which will cause hypoxia in the root system (0-2%)
The water management of plug seedling production is generally based on the expansion of cotyledons as the dividing line.
The water management before the cotyledons expands is relatively simple, that is, the lower half of the hole matrix must be kept moist. It is only necessary to control the alternating dry and wet of the upper half of the matrix of the hole.
After the cotyledons are expanded, the lower half of the hole matrix should be controlled to see dry and wet according to environmental changes and plant growth. You can dig up a part of the substrate before watering and observe whether there is a certain amount of humidity in the lower part. Of course, holding up the plug to estimate its weight and judging the humidity of the substrate is an ideal test method. The premise is that you have some experience to know the weight of the plug at different humidity levels. You can also lift the plug tray to see if the matrix at the bottom of the plug tray has dried out to determine whether to add water. By watering, let 10% of the water seep out of the plug tray, you can enter the wet cycle. When fertilizing or potting, it must be watered thoroughly. When pouring clear water, you only need to pour it until the water flows through the plug.
The water in the substrate is lost through evaporation and water absorption by the roots. The former plays a major role before the cotyledons expand; after the cotyledons expand, the roots dominated by transpiration play a major role in water absorption. So at this time, we have to judge how to water according to the impact of environmental and climate changes on plant transpiration.
For example, in the following situations, it is more appropriate for the water to reach only half of the hole:
1. The weather changes from sunny to cloudy to cold, or the humidity in the greenhouse is extremely high. The water evaporates slowly, the transpiration is low, and the plugs are not easy to dry out.
2. There is still a certain humidity in the lower half of the hole.
3. The seedlings need to be fertilized the next day.
When the weather is hot, the nursery can effectively control the growth of the seedlings by using half the water flow technology.
If you water too many times, the plants are easy to grow, reduce the permeability of the substrate, cause damage to the root system, and easily infect pathogens.
Watering in the greenhouse is the most important task and should not be performed by an inexperienced person. Watering requires more experience accumulated by workers on their own initiative rather than knowledge imparted in writing or verbally.






